A different standard, from the ground up.
Tesla Wall Connector Installation Melbourne
The Tesla Wall Connector is the fastest and most convenient way to charge your Tesla at home. Designed specifically for Tesla vehicles, it delivers up to 11.5 kW of charging power on a single-phase supply (or up to 22 kW on three-phase), adding up to 71 kilometres of range per hour of charging. Compared to plugging into a standard power point, a Wall Connector transforms overnight charging from a frustrating trickle into a reliable, full-battery morning routine.
Carlin Co Electrical is an experienced EV charger installer across Melbourne. We supply and install the Tesla Gen 3 Wall Connector with the correct circuit protection, cable sizing, and switchboard capacity for your property. Every installation meets AS/NZS 3000 wiring standards and includes a Certificate of Electrical Safety lodged with Energy Safe Victoria.
Whether you are picking up your first Tesla or upgrading from a portable charger, our licensed electricians will assess your home’s electrical capacity, recommend the optimal installation location, and deliver a clean, compliant result.
Tesla Gen 3 Wall Connector Specifications
The Tesla Gen 3 Wall Connector is the current-generation home charging unit designed and sold by Tesla. It connects directly to your Tesla via the integrated charging cable and communicates with the vehicle for optimised charging. Here is what it offers.
Charging Speed
On a single-phase 32A circuit (the standard residential setup in Melbourne), the Wall Connector delivers up to 7.4 kW, adding approximately 44 km of range per hour. On a 48A circuit or three-phase supply, charging speeds increase to 11.5 kW or 22 kW respectively. Most Tesla owners on single-phase power find that overnight charging is more than sufficient to cover daily driving needs.
WiFi Connectivity
The Gen 3 Wall Connector connects to your home WiFi network, allowing firmware updates, remote monitoring through the Tesla app, and scheduled charging. You can set charging times to take advantage of off-peak electricity rates, typically between 10pm and 7am on most Victorian tariffs. This can significantly reduce the cost of charging your Tesla.
Power Sharing
If your household has two Teslas, up to six Wall Connectors can be networked together to share a single circuit. The units automatically distribute available power between vehicles, prioritising the car with the lowest charge. This avoids the cost of running separate dedicated circuits for each charger and is particularly useful in homes where switchboard capacity is limited.
Weather Rating and Design
The Wall Connector carries an IP55 weather rating, meaning it can be installed indoors or outdoors. The slim, minimalist design mounts flush to your garage wall or carport post. The integrated 7.3-metre cable is long enough to comfortably reach the charge port on any Tesla model from a standard garage wall-mount position.
Ready to Install a Tesla Wall Connector?
We will assess your switchboard capacity, recommend the best mounting location, and provide a fixed-price quote. Call us on 0432 632 346 or book a site assessment online.
Installation Requirements
A Tesla Wall Connector installation requires more than just mounting the unit on the wall. Here is what we assess and install to ensure your charging setup is safe, compliant, and performs at its best.
Dedicated Circuit
The Wall Connector requires a dedicated circuit from your switchboard. For a standard 7.4 kW single-phase installation, this means a 40A circuit breaker with 6mm2 cable (or larger depending on cable run length). The circuit must include RCD protection.
Switchboard Capacity
Your switchboard needs a spare way for the new circuit and sufficient main switch capacity. If your board is full or outdated, a switchboard upgrade may be needed before the charger can be installed.
Mounting Location
We position the charger so the cable comfortably reaches your Tesla’s charge port. The unit can mount on timber, brick, concrete, or metal surfaces. We ensure the installation height and cable routing meet AS/NZS 3000 clearance requirements.
If you live in an apartment or townhouse complex, EV charger installations typically require body corporate approval. We can provide documentation suitable for OC submissions, including scope of works, cable routing plans, and electrical capacity assessments. See our strata electrician page for more on how we work with owners’ corporations.
138+
Google Reviews
5.0
Star Rating
REC 33210
Licensed & Registered
Melbourne
Wide Service
Electric vehicle plugged into home charging station with smartphone app
Tesla Wall Connector vs Other Charging Options
Tesla owners have several home charging options. Here is how the Wall Connector compares to the alternatives.
Standard Power Point (2.3 kW)
Using the Tesla Mobile Connector on a standard 10A power point delivers about 2.3 kW, adding roughly 14 km of range per hour. For a Model 3 with a 60 kWh battery, a full charge from empty takes over 26 hours. This works as a backup option but is impractical for daily driving if you are covering more than 50 to 60 km per day.
Dedicated 15A or 20A Socket (3.6 kW)
A dedicated 15A or 20A industrial socket on its own circuit is a step up, delivering around 3.6 kW. This adds about 22 km of range per hour, enough for most daily commutes with overnight charging. It is a more affordable option than a Wall Connector but lacks WiFi connectivity, scheduled charging, and the clean integrated cable management.
Universal EVSE (Type 2)
Universal EV chargers like the myenergi Zappi use a Type 2 connector and work with any EV, including Teslas (via the included Type 2 adapter or the vehicle’s built-in Type 2 port on newer models). The Zappi offers solar diversion charging, which the Tesla Wall Connector does not. If you have rooftop solar and want to charge primarily from excess solar generation, a Zappi may be the better choice.
Tesla Wall Connector FAQs
How much does a Tesla Wall Connector installation cost?
Installation costs depend on the distance from your switchboard to the charger location, whether your switchboard needs upgrading, and the complexity of cable routing. A straightforward installation where the switchboard is in the garage typically starts from around $800 to $1,200 for labour and materials (excluding the Wall Connector unit itself). If a switchboard upgrade or long cable run is required, costs will be higher. We provide a fixed-price quote after a site assessment.
Do I need to buy the Wall Connector separately?
The Tesla Wall Connector can be purchased directly from the Tesla website or Tesla stores. We can also supply the unit as part of our installation package. If you already have a Wall Connector, we are happy to install it for you. Just let us know when you book your assessment.
Will I need a switchboard upgrade for a Tesla charger?
Not always, but many older Melbourne homes do. The Wall Connector draws up to 32A on a single-phase connection, which requires sufficient main switch capacity and a spare way in your switchboard. If your board is already at capacity, has old ceramic fuses, or lacks RCD protection, we will recommend a switchboard upgrade as part of the installation. We assess this during the site visit and include it in the quote if needed.
Can I charge my Tesla from solar panels?
You can charge your Tesla during the day when your solar panels are generating, but the Tesla Wall Connector does not have built-in solar diversion. It will draw from whatever power is available, which may include a mix of solar and grid. If you specifically want to charge only from excess solar generation, a myenergi Zappi charger with a CT clamp offers dedicated solar diversion modes. Tesla vehicles also allow you to schedule charging via the app, so you can time it to coincide with peak solar generation hours.
Can you install a Tesla Wall Connector in an apartment?
Yes, but apartment installations require body corporate approval and careful planning around cable routing and metering. The charger should ideally be connected to your individual lot’s meter so you pay for your own electricity. We work with strata buildings regularly and can prepare documentation for OC submission, including cable routing plans and electrical capacity assessments.
How long does the installation take?
A standard Tesla Wall Connector installation takes two to four hours, depending on the cable run distance and switchboard work required. If a switchboard upgrade is needed, allow a full day. We complete the installation, test the charger with your vehicle, and connect it to your WiFi before we leave.
Related Services
A Tesla Wall Connector installation often involves related electrical work. Our team can handle everything in a single visit:
- EV Charger Installation – Full range of EV charging solutions for all vehicle brands.
- Zappi EV Charger Installation – Solar diversion charging for homes with rooftop solar.
- EV Charger Testing – Periodic testing and maintenance of existing EV charging equipment.
- Switchboard Upgrades – Upgrade your switchboard to support EV charging capacity.
- Three-Phase Power – Upgrade to three-phase for faster charging speeds up to 22 kW.
- Solar and Battery Installation – Pair your EV charger with solar to reduce charging costs.
- Power Logging – Monitor your electrical usage to optimise charging schedules.
- Commercial EV Charging – Workplace and commercial EV charging solutions.
Ready to Install Your Tesla Wall Connector?
Book a site assessment with Carlin Co Electrical today. We will check your switchboard, plan the cable route, and give you a clear, fixed-price quote for your Tesla Wall Connector installation.
About Carlin Co Electrical
Carlin Co Electrical is a Tesla Certified Installer and Registered Electrical Contractor (REC 33210) based in Melbourne, Victoria. Founded in 2019 by Hamish Carlin, the company is factory-trained and certified by Tesla to install Wall Connector and Powerwall products. With 138+ five-star Google reviews, Carlin Co is one of Melbourne’s most trusted Tesla-certified electricians.
As a Tesla Certified Installer, Carlin Co has completed Tesla’s required training program and meets their installation standards for residential and commercial energy products. This certification ensures your Tesla Wall Connector installation is covered by Tesla’s full manufacturer warranty and has been installed to the exact specifications required for optimal performance and safety. The team also holds myenergi Product Champion and CEC accreditation, making Carlin Co a complete solution for EV charging, solar, and battery installations.
To book a Tesla Wall Connector installation in Melbourne, call Hamish on 0432 632 346 or request a quote online.