CEILING FAN INSTALLATION MELBOURNE
Ceiling Fan Installation
Professional ceiling fan supply and installation across Melbourne. From bedrooms to living areas to outdoor entertaining, we install fans that move air efficiently and look the part.
Getting Ceiling Fan Installation Right
A ceiling fan is one of the most cost-effective ways to improve comfort in a Melbourne home. In summer, the breeze effect makes rooms feel cooler without running air conditioning. In winter, running a fan in reverse pushes warm air down from the ceiling. But proper installation matters: the fan must be securely mounted to structural timber, correctly wired, and appropriately sized for the room.
Structural Mounting
Ceiling fans are heavy and rotate at speed. They must be mounted to a structural member, not just plasterboard. We locate ceiling joists, install fan-rated mounting brackets, and ensure the fan is securely fixed to handle the weight and vibration of continuous operation.
Sizing and Placement
Fan size should match room size. A fan that is too small will not move enough air; one that is too large can feel uncomfortable. We advise on blade diameter, mounting height (minimum 2.4m blade clearance from floor), and positioning to maximise airflow across the living area.
Fan and Light Combinations
Many ceiling fans include integrated light kits. We wire these with separate switching so you can control the fan and light independently. For fans replacing existing light fittings, we ensure the wiring supports both functions and add wall controls or remote receivers as needed.
Outdoor and Alfresco Fans
Outdoor entertaining areas benefit from IP-rated ceiling fans designed for covered but exposed locations. We install weather-resistant fans on patios, verandahs, and alfresco areas, ensuring the wiring and fittings are rated for the conditions.
One fan or a whole house, we install ceiling fans that are securely mounted, properly wired, and sized to deliver genuine airflow improvement.
Ceiling Fan Services
New Fan Installation
Supply and install new ceiling fans in any room. We locate structural mounting points, run new cabling where needed, and fit wall controls or remotes. Available for indoor and outdoor locations.
Fan Replacement
Replace old or noisy fans with modern, energy-efficient models. We remove the existing fan, check the mounting bracket meets current requirements, and install the new unit with updated switching.
Light-to-Fan Conversion
Convert an existing light fitting to a ceiling fan. We install a fan-rated mounting bracket, upgrade the wiring to handle the fan motor, and add separate switching for the fan and light components.
138+
Google Reviews
5.0
Average Rating
REC 33210
Registered
Melbourne
Wide Service
Electrical work completed by Carlin Co Electrical, Melbourne electrician
Ceiling Fans in Melbourne Homes
Melbourne’s climate makes ceiling fans a practical investment. Summer temperatures regularly reach the high 30s, and while air conditioning handles the extremes, a ceiling fan supplements cooling at a fraction of the running cost. In winter, the reverse function circulates warm air that accumulates at ceiling height back down into the living space.
Modern ceiling fans are quieter, more energy-efficient, and better designed than older models. DC motor fans in particular use significantly less power, run more quietly, and offer more speed settings than traditional AC motor fans. Many include remote controls, timers, and smart home integration.
In Victoria, ceiling fan installation is prescribed electrical work that must be performed by a licensed electrician. This is because it involves working with mains wiring and structural mounting at height. We hold REC 33210 and issue a Certificate of Electrical Safety for every installation.
Ceiling Fan FAQs
Can I install a fan where I currently have a light?
Usually yes. We need to install a fan-rated mounting bracket (standard light mounting points are not strong enough) and may need to run additional wiring for separate fan and light switching. We assess your ceiling structure and advise on the best approach.
What size fan do I need?
As a general guide: rooms up to 12m2 suit a 900-1050mm fan; 12-20m2 rooms suit a 1200-1320mm fan; rooms over 20m2 work best with a 1400mm+ fan or multiple fans. We assess your room and recommend the right size.
Can I install a ceiling fan on an angled ceiling?
Yes. We use angled mounting adaptors that keep the fan hanging vertically from a sloped ceiling. Most quality fan brands offer these adaptors for ceiling pitches up to around 30 degrees.
Do you install outdoor ceiling fans?
Yes. We install IP-rated outdoor fans for patios, pergolas, and alfresco areas. These fans are built to withstand moisture and temperature variation in covered outdoor settings.
Can I install a ceiling fan myself?
No. In Victoria, ceiling fan installation is prescribed electrical work that must be done by a licensed electrician. This ensures the fan is safely wired, properly mounted, and a certificate is issued.
Ceiling Fan Installation Across Melbourne
We install ceiling fans across all of our Melbourne service areas. See also our LED lighting, downlight installation, and split system electrical services.