A different standard, from the ground up.
USB Powerpoint Installation Melbourne
USB power points replace your existing wall outlets with integrated units that include built-in USB-A and USB-C charging ports alongside the standard power sockets. Instead of cluttering your benchtops and bedside tables with adapters and chargers, you can plug your phone, tablet, smartwatch, or headphones directly into the wall. It is a simple upgrade that makes a noticeable difference to how your home works day to day.
Carlin Co Electrical installs USB power points throughout Melbourne homes and offices. We supply quality units from trusted Australian brands and install them into your existing wall boxes, meaning no new wiring or wall damage is required in most cases. The swap takes around 15 to 20 minutes per power point and the result is a clean, modern finish that blends with your existing switches and plates.
Whether you want USB charging at your bedside, kitchen bench, home office desk, or throughout the entire house, our licensed electricians will recommend the right units for each location and install them neatly and safely.
USB-A vs USB-C Power Points
USB power points come in several configurations. Understanding the difference between USB-A and USB-C helps you choose the right units for your needs, both now and for the next several years of device charging.
USB-A Ports
USB-A is the familiar rectangular connector found on most older chargers and cables. USB-A power points typically deliver 5V at 2.1A to 2.4A (roughly 10 to 12 watts), which is adequate for charging smartphones, tablets, and smaller devices. Most USB-A power points have two ports, allowing you to charge two devices simultaneously. While USB-A is gradually being replaced by USB-C, it remains useful for devices that still ship with USB-A cables.
USB-C Ports
USB-C is the newer, reversible oval connector now standard on iPhones, Android phones, iPads, laptops, and most modern electronics. USB-C power points with Power Delivery (PD) support can deliver up to 20 to 30 watts, enough to fast-charge smartphones and even power some laptops. We recommend USB-C units for any new installation, as USB-C is now the universal charging standard and will be the primary connector for the foreseeable future.
Dual USB-A + USB-C Combo
The most versatile option is a power point with both USB-A and USB-C ports alongside the standard 240V sockets. This gives you maximum compatibility with current and older devices. These combo units fit into standard Australian wall boxes and are the most popular choice for whole-home USB upgrades.
Ready to Upgrade Your Power Points?
We supply and install USB power points in all configurations. Call us on 0432 632 346 or book an installation online to get started.
Best Locations for USB Power Points
Not every power point in your home needs a USB upgrade. Here are the locations where USB power points make the biggest practical difference.
Bedside Tables
The most popular location for USB power points. Charge your phone overnight without a bulky adapter block taking up the outlet or sitting on your bedside table. USB-C with fast charging is ideal here for topping up quickly before bed.
Kitchen Bench
Keep your kitchen benchtop clear of charger clutter while keeping devices charged. USB ports at the kitchen bench let you follow recipes on your tablet or keep your phone topped up while cooking, without losing a power socket to a charger.
Home Office
Desk-height USB power points keep cables tidy and devices charged without adapter blocks competing for socket space. A USB-C PD port at your desk can even keep a laptop charged, reducing the number of power bricks you need.
Other popular locations include lounge room entertainment units, bathroom vanities (with appropriate IP-rated units), children’s study areas, hallway console tables, and garage workbenches. We can advise on the best configuration for each room during the installation.
138+
Google Reviews
5.0
Star Rating
REC 33210
Licensed & Registered
Melbourne
Wide Service
Electrician in Black Rock, Melbourne – Carlin Co Electrical
How Installation Works
USB power point installation is one of the simplest electrical upgrades you can make to your home. Here is what to expect.
Direct Swap Into Existing Wall Boxes
In most cases, the new USB power point fits directly into your existing wall box (the mounting frame behind the faceplate). The old mechanism and faceplate are removed, the new USB unit is wired to the existing cable, and the new faceplate is fitted. No wall cutting, plastering, or repainting is required. The circuit is isolated at the switchboard while we work and restored once the installation is tested.
Quick Installation Time
Each power point swap takes approximately 15 to 20 minutes. If you are upgrading multiple points across your home, we can typically complete a full-house upgrade in a single visit. For a standard job of four to six points, allow around two hours including testing and cleanup.
Quality Units From Trusted Brands
We supply USB power points from reputable Australian electrical brands including Clipsal, HPM, and Legrand. All units carry Australian safety approvals and are designed to fit standard Australian wall plates. We can match the colour and style of your existing switches and power points so the new units blend seamlessly with your home’s interior.
USB Powerpoint FAQs
How much does a USB power point installation cost?
The cost includes the USB power point unit plus installation labour. Individual unit prices vary depending on the brand and configuration (USB-A only, USB-C only, or combo). Installing multiple units in a single visit is more cost-effective per point due to the reduced travel and setup component. Contact us for a quote based on the number of points you want to upgrade.
Do USB power points use electricity when nothing is plugged in?
Modern USB power points draw a very small amount of standby power when nothing is connected, typically less than 0.5 watts. This is negligible on your electricity bill and comparable to the standby draw of the adapter blocks they replace. When a device is connected, the USB port draws only the power needed to charge that device.
Can I install USB power points myself?
No. In Victoria, all electrical work including replacing power point mechanisms must be carried out by a licensed electrician. This is a safety requirement under the Electricity Safety Act 1998. DIY electrical work is illegal and can result in fines, voided insurance, and serious safety risks. Our licensed electricians carry out all installations safely and provide the required compliance documentation.
Will USB-C fast charge my phone?
USB-C power points with Power Delivery (PD) support can fast charge compatible devices. The charging speed depends on the wattage output of the port and what your device supports. Most USB-C PD power points deliver 20 to 30 watts, which provides fast charging for iPhones (with USB-C), Samsung Galaxy devices, iPads, and many other modern phones and tablets. We can recommend the right specification for your charging needs.
Should I choose USB-A or USB-C?
If you are installing new USB power points, we generally recommend units with at least one USB-C port. USB-C is now the standard connector for all major phone brands, tablets, laptops, and accessories. A combo unit with both USB-A and USB-C gives you the most flexibility for current and older devices. If budget allows, prioritise USB-C PD units for fast charging capability.
Do you service all areas of Melbourne?
We install USB power points across Melbourne’s inner suburbs, bayside areas, and surrounding regions. Our base is in Port Melbourne, and we regularly work in South Melbourne, Albert Park, St Kilda, Brighton, Richmond, and throughout the broader metropolitan area.
Related Services
USB power point upgrades pair well with other small electrical improvements. Our team can handle several jobs in a single visit:
- Power Point Installation – Add new power points or relocate existing ones throughout your home.
- Extra Power Points – Additional outlets where you need them most.
- LED Lighting Installation – Upgrade your lighting to energy-efficient LEDs while we are on site.
- Downlight Installation – Modern LED downlights for kitchens, bedrooms, and living areas.
- Kitchen Electrical – Complete electrical upgrades for kitchen renovations.
- Bathroom Electrical – Power points, lighting, and exhaust fans for bathrooms.
- Home Automation – Smart switches, dimmers, and home automation wiring.
- Data and Network Cabling – Hardwired network connections for reliable internet throughout your home.
Ready to Upgrade to USB Power Points?
Contact Carlin Co Electrical today to arrange a USB power point installation. We will recommend the best units for your home and install them cleanly in a single visit.