LICENSED & INSURED – REC 33210
Power Point Installation Melbourne
Need extra power points? We install new GPOs, relocate existing outlets, and upgrade old power points throughout Melbourne homes and businesses. Licensed electricians, fixed quotes, and clean installations every time.
When You Need New Power Points
Most Melbourne homes were built with far fewer power points than modern life requires. If you are running extension leads across rooms, using double adaptors, or plugging powerboards into powerboards, it is time to install additional outlets. Overloaded power points and extension leads are a genuine fire risk – they are one of the most common causes of electrical fires in Australian homes.
Common situations where people call us for new power points include kitchen renovations (never enough outlets on the bench), home office setups, wall-mounted TV installations, outdoor entertaining areas, garages and sheds, and new appliance installations like air conditioners, ovens, or EV chargers that need a dedicated circuit.
Types of Power Points We Install
Standard Double GPOs
The standard Australian double power point (General Purpose Outlet) is the most common installation we do. We fit quality brands like Clipsal and HPM in white or your choice of colour to match your existing fittings. Double outlets are standard – they cost almost the same as a single and give you twice the capacity.
Weatherproof Outdoor Power Points
IP53-rated power points with spring-loaded flaps for patios, decks, sheds, and garages. These are designed to keep moisture and dust out when not in use. We install them on a dedicated RCD-protected circuit as required by Australian wiring rules for added safety in outdoor environments.
Dedicated Appliance Circuits
High-draw appliances like ovens, cooktops, air conditioners, hot water systems, and EV chargers need their own dedicated circuit run directly back to the switchboard. This prevents overloading shared circuits and ensures the appliance receives reliable power. We run new circuits in the correct cable size with the right circuit breaker rating for each appliance.
Floor and Pop-Up Power Points
For kitchen islands, open-plan living areas, and commercial spaces where wall outlets are not practical. Floor-mounted and pop-up power points sit flush with the surface when not in use and pop up or flip open when you need them. These require careful installation to ensure they are level, weatherproofed against spills, and positioned where cables will not be a trip hazard.
How We Install New Power Points
Adding a power point to an existing home involves running cable from the nearest circuit (or from the switchboard for dedicated circuits) through the wall cavity, ceiling space, or under the floor to the new outlet location. We cut a neat hole in the plaster, mount a flush box, terminate the cable, and fit the new outlet.
Where concealed wiring is not possible – for example, in brick walls or where there is no ceiling access – we use surface-mounted mini trunking or conduit for a tidy finish. Every new power point is tested, and we confirm the circuit has RCD protection as required by current regulations.
Power Point Installation Pricing
The cost of installing a new power point depends on the distance from the nearest circuit, the wall material, ceiling access, and whether a new circuit is needed. Adding an outlet near an existing one on the same wall is straightforward. Running a dedicated circuit from the switchboard to a detached garage is a bigger job.
We quote fixed prices for power point work – you know the cost before we start and there are no surprises. If you need multiple outlets installed at the same time, the per-point cost comes down because the setup and access work is shared.
Need More Power Points?
Stop using extension leads and double adaptors. Get proper power points installed by a licensed Melbourne electrician.
Frequently Asked Questions
Can I install a power point myself?
No. In Australia, all electrical work must be performed by a licensed electrician. This includes installing, moving, or replacing power points. DIY electrical work is illegal, dangerous, and will void your home insurance. It can also cause serious safety issues that put your family at risk.
How many power points do I need in a kitchen?
A well-designed kitchen typically needs a minimum of six to eight power points on the benchtop, plus dedicated outlets for the fridge, dishwasher, rangehood, oven, and microwave. Think about every appliance you use: kettle, toaster, coffee machine, mixer, food processor. Each of these needs an outlet, and having spares means you are not constantly unplugging to swap appliances.
Is it safe to use double adaptors?
Double adaptors are not recommended by electrical safety authorities. They can overload a single outlet, create loose connections, and are a known fire hazard. If you find yourself needing a double adaptor regularly, the proper solution is to install additional power points. A surge-protected powerboard is safer than a double adaptor for temporary use, but permanent extra outlets are the right fix.
Do new power points need to be on an RCD?
Yes. Current Australian wiring rules (AS/NZS 3000 (as required by Energy Safe Victoria)) require all new power point circuits to be protected by a residual current device (safety switch). If your switchboard does not have RCD protection on the circuit you are adding to, we will install one as part of the job. This is a regulatory requirement, not optional.
Why Choose Carlin Co for Power Point Installation
We install power points properly – flush-mounted, neatly wired, and tested. We match the brand and colour of your existing outlets so the new ones blend in, and we take care with the plaster cutting so you do not need a plasterer after we leave.
Every installation includes testing, RCD verification, and a certificate of compliance. We clean up after ourselves and leave your home the way we found it.
We also install USB power points, safety switches, switchboard upgrades, and security lighting across Melbourne.
Power Point Installation Across Melbourne
We install power points throughout Melbourne including South Melbourne, Port Melbourne, Albert Park, St Kilda, Prahran, Richmond, Hawthorn, Kew, Camberwell, Malvern, Toorak, South Yarra, Brunswick, Fitzroy, Collingwood, Carlton, Northcote, Preston, Essendon, Moonee Ponds, Footscray, Williamstown, Yarraville, and surrounding suburbs.
Our electricians service suburbs across Melbourne, including Port Melbourne, South Melbourne, Richmond, South Yarra, St Kilda, and Toorak. View all service areas.
Get Your Power Point Installation Quote
Fixed pricing. Quality fittings. Neat, compliant installations by licensed Melbourne electricians.