LICENSED & INSURED – REC 33210
Security Lighting Installation Melbourne
Professional security and sensor light installation to protect your Melbourne home or business. Motion-activated floodlights, dusk-to-dawn LEDs, and perimeter lighting designed to deter intruders and keep your property safe. All security lighting installations meet AS/NZS 3000 wiring standards and Energy Safe Victoria requirements.
What Security Lighting Does for Your Property
Security lighting is one of the most effective deterrents against break-ins and property crime. Well-placed lights eliminate dark spots around your home, illuminate entry points, and make it obvious when someone is approaching your property. Research consistently shows that good exterior lighting is one of the simplest ways to reduce the risk of burglary.
As licensed Melbourne electricians, we design and install security lighting systems that cover the areas that matter: driveways, side gates, rear yards, garages, and building perimeters. Every light is hardwired to your switchboard, properly weatherproofed, and positioned for maximum coverage without causing light spill to neighbours.
Types of Security Lights We Install
Motion Sensor Floodlights
These are the workhorses of home security lighting. A PIR (passive infrared) sensor detects movement and triggers a bright floodlight that illuminates a wide area. Modern LED floodlights draw very little power and the sensor means they only run when needed. We adjust the sensitivity, range, and duration so they activate for people but not every passing cat.
Dusk-to-Dawn Lights
These use a photocell sensor to turn on automatically at sunset and off at sunrise. They provide constant low-level illumination around entry points and pathways overnight. LED dusk-to-dawn lights are extremely efficient – a quality 15-watt LED produces as much light as a 100-watt halogen and costs only cents per night to run.
LED Floodlights on Manual Switch or Timer
Sometimes simple is best. A high-output LED floodlight on a manual switch or timer gives you full control over when your exterior is lit. This works well for commercial properties where lights run during business hours, or for homeowners who want to light up the backyard when they are home.
Smart Security Lights
Wi-Fi connected security lights can be controlled from your phone, set on schedules, and integrated with cameras and alarm systems. We install and configure smart security lighting that works with platforms like Google Home and Apple HomeKit, so you can control your perimeter lighting from anywhere.
Where to Install Security Lighting
The most effective security lighting covers the areas that burglars target and the approach routes they use. Based on our experience installing security systems across Melbourne, these are the key zones to light:
Front entry and porch – a well-lit front door deters opportunistic break-ins and helps you see who is at the door. Driveway and carport – motion sensor floodlights here alert you to vehicles and foot traffic. Side gates and passages – these narrow access points are where intruders enter unseen, and a sensor light removes that cover. Rear yard and back door – the rear of the house is the most common entry point for break-ins, so good lighting here is essential. Garage and shed – separate structures are often targeted for tools and valuables.
Security Lighting Pricing
The cost of security lighting depends on the number of lights, the type of fitting, whether new wiring is needed, and the mounting locations. A single motion sensor floodlight on an existing circuit is a straightforward job. A full perimeter system with multiple zones, timers, and smart controls is a larger project.
We provide fixed quotes that include the light fittings, wiring, mounting hardware, sensor setup, and testing. You know the total before we start, and there are no surprises on the invoice.
Protect Your Property Tonight
Professional security lighting installation by licensed Melbourne electricians. Fixed quotes, quality fittings, and expert positioning.
Frequently Asked Questions
Do I need an electrician to install security lights?
Yes. In Victoria, any hardwired electrical work must be performed by a licensed electrician. This includes installing new light fittings, running cables, and connecting to your switchboard. Solar-powered stake lights that sit on the ground do not require an electrician, but they are far less effective than hardwired security lighting.
How much does security lighting cost to run?
Modern LED security lights are very efficient. A 30-watt LED floodlight on a motion sensor might run for a total of two to three hours per night, costing roughly 2 to 3 cents. Even a dusk-to-dawn light running all night uses only a few cents of electricity. The running cost is negligible compared to the security benefit.
Can security lights be installed on brick or rendered walls?
Absolutely. We install security lights on brick, render, weatherboard, Colorbond, timber, and concrete surfaces. The mounting method is matched to the wall material to ensure a secure, weatherproof installation. For brick and render, we use appropriate masonry fixings and seal any penetrations.
Will security lights annoy my neighbours?
Not when they are installed correctly. We position and angle lights to illuminate your property without spilling into neighbouring yards or windows. Sensor lights with adjustable detection zones can be set to ignore areas beyond your boundary. If light spill is a concern, we use shielded fittings that direct light downward rather than outward.
Why Choose Carlin Co for Security Lighting
We take the time to assess your property and recommend lighting that actually addresses the vulnerabilities – not just bolt a floodlight to the wall and call it done. Every installation is designed for coverage, weatherproofing, and minimal light pollution.
We use quality LED fittings rated for Australian conditions (IP65 or higher for exposed locations) and back every installation with our workmanship guarantee. All work is tested and a certificate of compliance is issued.
Need other electrical work while we are there? We also handle switchboard upgrades, safety switch installation, garden and landscape lighting, and power point installation across Melbourne.
Security Lighting Installation Across Melbourne
We install security lighting throughout Melbourne including South Melbourne, Port Melbourne, Albert Park, St Kilda, Prahran, Richmond, Hawthorn, Kew, Camberwell, Malvern, Toorak, South Yarra, Brunswick, Fitzroy, Collingwood, Carlton, Northcote, Preston, Essendon, Moonee Ponds, Footscray, Williamstown, Yarraville, and surrounding suburbs.
We install security lighting across Melbourne, including Port Melbourne, Richmond, St Kilda, Carlton, Brunswick, and Fitzroy. View all service areas.
Get a Security Lighting Quote
Fixed pricing. Quality LED fittings. Expert positioning for maximum coverage.